Dairy & Beverage Processing · HTST

Pasteurizers for Dairy and Beverage Plants

Continuous plate and tubular pasteurizers and sterilizers that make milk, cream, juice and drinks safe, keep their fresh taste and recover most of the heat they use.

Protrus milk pasteurizer with plate heat exchanger, balance tank, pumps and control cabinet on one stainless skid

Protrus milk pasteurizer: plate heat exchanger, balance tank, pumps and control cabinet on one stainless skid.

1,000–35,000 L/h

Milk pasteurizers

1,000–10,000 L/h

Cream pasteurizers

1,000–25,000 L/h

Beverage pasteurizers and sterilizers

> 90 %

Heat recovery in production

Range overview

What a Pasteurizer Does

Continuous plate and tubular pasteurizers and sterilizers that make milk, cream, juice and drinks safe, keep their fresh taste and recover most of the heat they use.

A pasteurizer heats a liquid to a set temperature, keeps it there for a set time and cools it again, in a closed and continuous flow. This kills pathogens and most spoilage organisms while the taste, color and nutrients stay close to the raw product.

Protrus builds HTST (high temperature, short time) units on a single stainless skid: balance tank, feed pump, plate or tubular heat exchanger, holding tube, flow diversion valve, hot water set, CIP dosing and PLC control. The skid is piped, wired and water tested in our workshop, so it is ready to connect on site.

Pasteurizer and Sterilizer Range

Five-section milk pasteurizer with plate heat exchanger and control panel

Dairy · Plate type

Milk Pasteurizer

Market, cheese and yogurt milk, drinking yogurt. 1,000–35,000 L/h.

Cream pasteurizer with balance tank, holding cell, plate heat exchanger and touch panel

Dairy · High temperature

Cream Pasteurizer

Cream for butter, whipping and cultured cream, mixes. 1,000–10,000 L/h.

Plate type beverage pasteurizer with vacuum deaerator and service platform

Clear drinks

Plate Type Beverage

Clear juice, tea, soft drinks and water. 1,000–25,000 L/h.

Tubular type beverage pasteurizer with tube-in-tube heat exchangers

Pulp · Fibers

Tubular Type Beverage

Juice with pulp, nectar, smoothie, puree. 1,000–25,000 L/h.

Tubular sterilizer for juice with flash vessel, homogenizer and control panel

Aseptic · Hot fill

Sterilizer Beverage

95–140 °C for shelf-stable juice and drinks.

Heat Treatment Programs at a Glance

TreatmentTemperatureHolding timeTypical productsProtrus unit
Thermization63–65 °C (145–149 °F)15–20 sRaw milk held before cheese makingMilk pasteurizer
HTST pasteurization72–78 °C (162–172 °F)15–30 sMarket milk, cheese milk, flavored milkMilk pasteurizer
High pasteurization85–95 °C (185–203 °F)3 s – 5 minCream, yogurt milk, drinking yogurt, ice cream mixMilk or cream pasteurizer
Juice pasteurization85–95 °C (185–203 °F)15–30 sJuice, nectar, iced tea, soft drinksPlate or tubular beverage pasteurizer
Hot fill / aseptic, high-acid95–110 °C (203–230 °F)15–60 sShelf-stable juice, nectar, smoothieTubular sterilizer
Sterilization, low-acid130–140 °C (266–284 °F)4–10 sPlant-based and protein drinks, milk teaTubular sterilizer

Values are typical; final temperatures and times follow the product, local regulations and trials.

Standard Capacities

UnitProductsCapacity
Milk pasteurizerMilk, yogurt, cheese, drinking yogurt1,000–35,000 L/h
Cream pasteurizerCream, high-fat mixes1,000–10,000 L/h
Beverage pasteurizerJuice, nectar, tea, drinks1,000–25,000 L/h

Built In for Every Unit

FeatureBenefit
Flow diversion valveNo under-heated product goes forward
Positive pressurePasteurized side never takes raw product
Data loggingEvery batch traceable on the HMI

Higher capacities are available on request and are built to order.

Where Pasteurizers Work in Dairy Plants

  • Market and ESL milk lines before filling
  • Cheese milk for white cheese, mozzarella and hard cheese
  • Yogurt, drinking yogurt, ayran and kefir milk at 90–95 °C (194–203 °F)
  • Cream for butter, whipping and cultured cream; ice cream mix

Where Pasteurizers Work in Beverage Plants

  • Clear and cloudy juice, NFC juice and nectars
  • Iced tea, soft drinks, flavored water and syrups
  • Smoothies, purees and plant-based drinks
  • Before hot filling, aseptic filling or cold-chain filling

Milk pasteurizers

Milk Pasteurizer for Market Milk, Cheese Milk and Yogurt Milk

A five-section plate pasteurizer that heats, holds and cools milk in one continuous flow and feeds separators, homogenizers and tanks at the right temperature.

Five-section milk pasteurizer with plate heat exchanger and control panel

Five-section milk pasteurizer with plate heat exchanger and control panel.

1,000–35,000

L/h, higher on request

72–78 °C

15–30 s for market milk

> 90 %

heat recovery in production

AISI 316L

plates and wetted parts

How the Milk Pasteurizer Works

Cold raw milk flows from the balance tank through the regeneration section, where the hot pasteurized milk warms it. It leaves at separation temperature for the separator and standardizer, comes back, warms further and passes the homogenizer.

A hot water circuit lifts it to pasteurization temperature, the holding tube keeps it there for a fixed time, and the diversion valve checks the temperature before the milk goes back through regeneration and ice-water cooling.

Milk pasteurizer connected to a high pressure homogenizer

Milk pasteurizer connected to a high pressure homogenizer.

HTST milk pasteurizer process flow: balance tank, regeneration, separator, homogenizer, heating, holding tube, flow diversion and ice-water cooling

HTST milk pasteurizer process flow, plate type, five sections. Typical values.

Standard Temperature Programs (Typical)

StepMarket milkCheese milkYogurt milkDrinking yogurt / ayran
Inlet4 °C (39 °F)4 °C (39 °F)4 °C (39 °F)4 °C (39 °F)
Separation / standardization50–55 °C50–55 °C50–55 °C50–55 °C
Homogenization65–70 °C, 150–200 barnot used or partial65–70 °C, 150–250 bar65–70 °C, 150–200 bar
Deaeration (optional)65–70 °C–65–70 °C65–70 °C
Pasteurization / holding74–78 °C · 15–16 s72–74 °C · 15–16 s90–95 °C · 3–5 min90–95 °C · 3–5 min
Outlet2–4 °C to storage30–38 °C to cheese vat42–44 °C to fermentation42–44 °C to fermentation

150–250 bar equals about 2,200–3,600 psi. Homogenization runs on a Protrus high pressure homogenizer.

What the Milk Pasteurizer Connects To

  • Separator and standardizer at 50–55 °C (122–131 °F)
  • Homogenizer and vacuum deaerator at 65–70 °C (149–158 °F)
  • Raw milk silos, storage and fermentation tanks
  • Plant CIP station or its own CIP dosing

Why It Pays Back

  • Over 90 % heat recovery cuts steam and ice-water use
  • Recipes switch the skid between milk and yogurt milk
  • Automatic divert keeps every liter within the program
  • Long runs between cleanings with low-fouling plates

Holding times over 30 s (yogurt milk, drinking yogurt) use a holding tube mounted outside the pasteurizer frame and a second hot water unit, so the same skid can switch between market milk and fermented products.

Cream pasteurizers

Cream Pasteurizer for Butter, Whipping and Cultured Cream

High-temperature pasteurization for fat-rich, viscous products, with gentle pumping that protects the fat globules and the flavor of the cream.

Cream pasteurizer with balance tank, holding cell, plate heat exchanger and touch panel
Cream pasteurizer skid with plate heat exchanger and touch panel

Cream pasteurizers with balance tank, holding cell, plate heat exchanger and touch panel.

Why Cream Needs Its Own Pasteurizer

Cream carries 30–45 % fat. It is thicker than milk, sticks to hot surfaces and its fat globules break easily. Cream is also heated harder than milk, often 90–95 °C (194–203 °F), to destroy enzymes and give butter and whipping cream a long, clean shelf life.

The Protrus cream pasteurizer uses wide-gap plates, low-shear pumps and a hot water circuit with a small temperature difference to the product, so cream does not burn on the plates and keeps its whipping and churning quality.

1,000–10,000

L/h, higher on request

85–95 °C

pasteurization, 3–15 s

8 °C

typical outlet to cream tank

10 + 9

product and CIP recipes

Compact cream pasteurizer with open frame for service

Compact cream pasteurizer with open frame for service.

Designed for Viscous, Fat-Rich Products

  • Wide-gap or free-flow plates for high viscosity and low pressure drop
  • Positive displacement or low-speed centrifugal pumps that do not whip air into the cream
  • Inlet from 8 °C cold cream or 50–60 °C directly from the separator
  • Optional vacuum deaerator to remove feed flavors before butter making
  • Hot water set keeps the heating medium only 2–4 K above the product
  • Outlet to cream ripening tanks, butter churn, cream cheese or UHT line

Typical Cream and Mix Programs

ProductFatPasteurizationHoldingOutletNext step
Cream for butter35–42 %90–95 °C3–15 s8–10 °CRipening tank, butter churn
Whipping cream30–38 %85–90 °C15 s4–6 °CFilling or UHT line
Cultured / sour cream18–30 %90–95 °C3–5 min20–30 °CFermentation tank
Coffee cream10–20 %85–90 °C15 s4–6 °CFilling
Ice cream mix8–16 %85–90 °C15–30 s4–5 °CAgeing tanks, after homogenizer

Beverage pasteurizers

Beverage Pasteurizers: Plate Type and Tubular Type

Continuous pasteurizers for juice, nectar, tea and soft drinks. The product decides the heat exchanger: plates for clear drinks, tubes for pulp, fibers and pieces.

Plate type beverage pasteurizer with vacuum deaerator and service platform

Plate Type Beverage Pasteurizer

A gasketed plate heat exchanger with regeneration, heating and cooling sections gives the highest heat recovery in the smallest space. The unit shown has a vacuum deaerator and a service platform; plates are added when capacity grows.

Best for: clear and cloudy juice; iced tea; soft drinks and flavored water; syrups and drink bases.

Tubular type beverage pasteurizer with tube-in-tube heat exchangers

Tubular Type Beverage Pasteurizer

Tube-in-tube or multi-tube heat exchangers with wide, smooth channels. Pulp, fibers and fruit cells pass without blocking, and the unit runs longer between cleanings. Corrugated tubes raise turbulence and heat transfer.

Best for: juice with pulp and NFC juice; nectars and smoothies; purees and concentrates; plant-based drinks.

Plate or tubular heat exchanger: plate type for clear drinks, tubular type for juice with pulp, fibers and pieces

Plate or tubular heat exchanger? The product channel decides the design.

Typical Beverage Programs

ProductpHPasteurizationHoldingHeat exchangerFilling
Clear juice (apple, grape)3.2–3.885–90 °C15–30 sPlateHot fill or cold fill
Orange juice, NFC, with pulp3.4–4.090–95 °C15–30 sTubularAseptic or cold chain
Nectar, smoothie3.4–4.290–95 °C30–60 sTubularHot fill or aseptic
Iced tea, soft drinks2.8–4.580–92 °C15–30 sPlateHot fill or tunnel

Fruit juice is acidic (pH below 4.6), so 85–95 °C (185–203 °F) is enough to make it stable. A vacuum deaerator before heating removes oxygen, protects vitamin C and color, and stops foaming in the filler.

Sterilizers

Sterilizer Systems for Beverages

Tubular sterilizers that make juice and drinks shelf stable for aseptic or hot filling, with deaeration and homogenization in the same line.

Tubular sterilizer for juice with flash vessel, homogenizer and control panel

Tubular sterilizer for juice with flash vessel, homogenizer and control panel.

1,000–25,000

L/h, higher on request

95–140 °C

by product acidity

4–60 s

holding time

Aseptic

or hot fill outlet

Pasteurizer or Sterilizer?

A pasteurizer makes a drink safe for a chilled shelf life of days or weeks. A sterilizer goes further: it heats the drink above 95 °C (203 °F) for high-acid juice or to 130–140 °C (266–284 °F) for low-acid drinks, holds it, cools it and delivers it to an aseptic tank or filler, so the packed product keeps for months at room temperature.

Protrus builds sterilizers with tubular heat exchangers because they tolerate high pressure, high temperature and pulp, and run long production days between cleanings.

Tubular sterilizer for beverages process flow: balance tank, feed pump, regenerative preheating, vacuum deaerator, homogenizer, sterilizing heater, holding tube, cooling and aseptic tank

Tubular sterilizer for beverages, process flow. Typical values, aseptic or hot filling.

Built for Sterile, Shelf-Stable Drinks

  • Sterilizing the line itself with hot water before every run
  • Sterile water circulation while the filler waits, no restart
  • Divert and recirculation if temperature falls below set point
  • Regenerative sections recover heat from the hot product
  • Back pressure valve keeps the product liquid above 100 °C (212 °F)
Tubular sterilizer front view with tubular heater banks
Tubular sterilizer side view with deaerator and homogenizer on a common frame

Front and side views: tubular heater banks, deaerator and homogenizer on a common frame.

Design and automation

Pasteurizer Design, Automation and Application Areas

One skid, fully tested before delivery: heat exchanger, hot water set, pumps, valves, CIP dosing and PLC, with every temperature recorded for food safety audits.

Milk temperature through the pasteurizer: regeneration, separation, homogenization, heating, holding and cooling from 4 °C to 74 °C and back to 4 °C

Milk temperature through the pasteurizer: cold milk is heated by hot milk from 4 to 74 °C with no steam needed, and hot milk is cooled by cold milk from 74 to 4 °C. Typical HTST program.

Technical Data (Typical, 10,000 L/h Unit)

ParameterValue
Heat exchangerPlate type, 5 sections, AISI 316L plates, clip-on gaskets, AISI 304L frame
Heat recoveryAbove 90 % in production
HeatingHot water set: circulation pump, expansion tank, steam valve, trap and filter
Balance tankRotary CIP spray ball, level transmitter, automatic water inlet
PumpsHygienic feed and booster pumps with VFD, Ra 0.8 µm
Flow controlFlow meter with automatic speed control
SafetyDivert valve, pressure tracking, positive pressure on pasteurized side
CIPBuilt-in dosing, 2 pumps, conductivity meter at outlet
ControlPLC, 15″ HMI, 10 product and 9 CIP recipes, chart recorder
PipingRa 0.8 µm, DIN 11850; DIN 11851/11852 fittings, no dead legs

Standard Equipment

  • Temperature and pressure transmitters at all section inlets and outlets
  • Valve feedback units on every product and CIP valve
  • Data logger as a second record next to the PLC
  • Sloped-top stainless control panel, remote access
  • All connections on one side of the skid; drip tray at inlet

Options

  • Separator, standardizer, homogenizer or deaerator integration
  • Extended holding with automatic switch-over
  • Fouling detection on the heating section
  • Constant temperature to separator or homogenizer
  • Ultra-pasteurization (ESL), UPS, panel air cooler
Gasketed plate heat exchanger for pasteurizers

Gasketed plate heat exchanger.

Tube-in-tube heat exchanger for pulpy beverages

Tube-in-tube heat exchanger.

Multi-tube heat exchanger cutaway

Multi-tube cutaway.

Configurations

Pasteurizer Configurations for Dairy and Juice Plants

Each skid is laid out around the line it feeds: with a homogenizer and deaerator, as several pasteurizers for different products, or with plate and tubular heat exchangers for juice.

Milk Pasteurizers with Homogenizer and Deaerator

Pasteurizer frame with homogenizer and deaerator

Pasteurizer frame with homogenizer and deaerator.

Milk pasteurizer front view with control cabinet above the skid

Front view: control cabinet above the skid.

Pasteurizer and homogenizer side by side

Pasteurizer and homogenizer side by side.

Dairy Pasteurizer Plants for Several Products

Dairy pasteurizer with holding cell

Dairy pasteurizer with holding cell.

Three pasteurizers for milk, cream and mix

Three pasteurizers for milk, cream and mix.

Dairy pasteurizer with deaerator and buffer tank

With deaerator and buffer tank.

Juice Pasteurizer Configurations and Heat Exchangers

Tubular juice pasteurizer with homogenizer

Tubular pasteurizer with homogenizer.

Juice pasteurizer with vacuum deaerator

Pasteurizer with vacuum deaerator.

Gasketed plate heat exchanger for pasteurizers

Plate pack, exploded view.

Multi-pass tubular heater for beverage pasteurizers

Multi-pass tubular heater.

Applications

Typical Products

In beverage plants the same platform pasteurizes juice, nectar, tea, soft drinks and plant-based drinks; in dairy plants it prepares milk, cream and mixes for the next step.

Fruit juice, NFC and from concentrate, pasteurized in a Protrus beverage pasteurizer
Fruit juiceNFC and from concentrate
Nectar with pulp and puree, pasteurized in a tubular pasteurizer
Nectarwith pulp and puree
Iced tea for hot fill or aseptic filling
Iced teahot fill or aseptic
Vegetable juice, tomato and carrot
Vegetable juicetomato, carrot
Smoothie with fruit pieces and fibers
Smoothiefruit pieces, fibers
Plant-based drink, low-acid, sterilized at 135–140 °C
Plant-based drinklow-acid, 135–140 °C

Application Areas in Dairy Plants

Market milk, HTST and ESL pasteurized
Market milkHTST, ESL
Cheese milk, thermized or HTST pasteurized
Cheese milkthermized or HTST
Yogurt milk heated to 90–95 °C for 5 minutes
Yogurt milk90–95 °C, 5 min
Drinking yogurt, ayran and kefir base
Drinking yogurtayran, kefir base
Cream for butter and whipping
Creambutter, whipping
Ice cream mix pasteurized with a homogenizer
Ice cream mixwith homogenizer

Utilities: 3 × 400 V 50 Hz (others on request), steam 2–3 bar(g), cooling water and ice water 2–3 bar(g), oil-free instrument air 6 bar(g). Every pasteurizer is water tested in the Protrus workshop before shipment. For shelf-stable dairy, see our UHT units; for cleaning, our CIP units.

Frequently Asked Questions About Pasteurizers

Have a question about temperatures, capacities or heat exchangers? Ask our process engineers.

A pasteurizer heats a product to about 72–95 °C (162–203 °F) for a chilled shelf life of days or weeks. A sterilizer heats above 95 °C for high-acid juice or to 130–140 °C (266–284 °F) for low-acid drinks and delivers it to an aseptic tank or filler, so the packed product keeps for months at room temperature.

Market milk is typically held at 72–78 °C (162–172 °F) for 15–30 seconds. Cheese milk uses 72–74 °C for 15–16 seconds, while yogurt milk and drinking yogurt are heated to 90–95 °C (194–203 °F) for 3–5 minutes.

Plate heat exchangers give the highest heat recovery in the smallest space and suit milk, cream and clear drinks. Tubular heat exchangers have wide, smooth channels, so juice with pulp, fibers, nectars and smoothies pass without blocking and run longer between cleanings.

Protrus pasteurizers recover more than 90 % of the heat in production: in the regeneration section the hot pasteurized product warms the cold incoming product, which cuts both steam and ice-water use.

Milk pasteurizers run at 1,000–35,000 L/h, cream pasteurizers at 1,000–10,000 L/h and beverage pasteurizers and sterilizers at 1,000–25,000 L/h. Higher capacities are built to order.

Cream carries 30–45 % fat, is thicker than milk and is heated harder, often to 90–95 °C. Wide-gap plates, low-shear pumps and a hot water set only 2–4 K above the product keep cream from burning and protect its whipping and churning quality.

A flow diversion valve sends any under-heated product back, positive pressure on the pasteurized side keeps raw product out, and data logging records every batch on the HMI and in a separate data logger.

Yes. Recipes switch the skid between programs. Holding times over 30 s use a holding tube outside the frame and a second hot water unit, so the same skid can run market milk and fermented products.

Typically 3 × 400 V 50 Hz power (others on request), steam at 2–3 bar(g), cooling water and ice water at 2–3 bar(g), and oil-free instrument air at 6 bar(g).

Protrus pasteurizers have built-in CIP dosing with two pumps and a conductivity meter at the outlet, and can also connect to a central CIP unit. A rotary spray ball cleans the balance tank.

Get a Quote

Send Us Your Product and Capacity

Tell us the product, liters per hour, inlet and outlet temperatures, and whether a separator, homogenizer or deaerator joins the line. Protrus engineers size the heat exchanger, holding tube and utilities and deliver a tested skid.

  • Product and liters per hour
  • Inlet and outlet temperatures
  • Separator, homogenizer or deaerator
  • Filling: cold, hot fill or aseptic

Prefer email? info@protrus.com

Contact Form